Epson C31C636A898 Technical Reference - Page 46
Switches and Buttons
View all Epson C31C636A898 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3.1.3 ESC/POS Commands To directly control the TM printer using ESC/POS commands, EPSON proposes printing/ control via ESC/POS commands. The printer can be controlled directly by sending ESC/POS commands from an application to the printer. For detailed information about ESC/POS commands, please contact EPSON or your dealer. 3.1.4 Various Utilities We provide the utilities described below for developers of TM printer applications. You can obtain the utilities from one of the following URLs: For customers from North America, go to the following web site: http://pos.epson.com/ For customers from other countries, go to the following web site: http://www.epson-pos.com/ Select the product name from the "Select any product" pull-down menu. 3.1.4.1 Memory Switch Setting Utility This utility is designed to perform the memory switch-related functions of the TM printer easily. ❏ You can execute a communication test and self-test. ❏ You can set the switches, etc. (such as customized values and serial communication condition). 3.1.4.2 IP address setup utility for UB-E02 This utility and its detailed manual for developers allow you to set an IP address for a 10Base-T/ 100Base-TX Ethernet interface installed in the TM printer. Customers who have purchased the Ethernet model TM printer need this utility. 3.1.4.3 Electronic logo storage utility for NVRAM This utility is designed to save logos (bitmaps) to NVRAM (non-volatile RAM). By storing shop logos to NVRAM, the print speed can be increased. 3.2 Switches and Buttons On this printer, you can disable or enable the FEED button. For details on how to switch between disabled or enabled, refer to the documentation for OPOS Advanced Printer Driver and ESC/ POS commands, respectively. 3-6 Application Development Information Rev. A