Epson DM-D210 Installation Manual - Page 19
Attach fixing plate A to the TM printer using the stopper. When
![]() |
View all Epson DM-D210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English 4. Pass the cable for the DM-D210 through the hole on fixing plate A, and fix the cable at the bottom as shown below. 5. Connect the cable for the DM-D210 to the DM connector on the TM printer. 6. Attach fixing plate A to the TM printer using the stopper. When you attach the stopper, insert the projections on the stopper into the holes of fixing plate B. Fixing plate A can be attached on either side of the printer. (The illustration below shows fixing plate A attached to the right side of the printer.) 17
![](/manual_guide/products/epson-dmd210-installation-manual-2d1c055/19.png)
17
English
4.
Pass the cable for the DM-D210 through the hole on fixing plate A,
and fix the cable at the bottom as shown below.
5.
Connect the cable for the DM-D210 to the DM connector on the TM
printer.
6.
Attach fixing plate A to the TM printer using the stopper. When
you attach the stopper, insert the projections on the stopper into the
holes of fixing plate B. Fixing plate A can be attached on either side
of the printer. (The illustration below shows fixing plate A attached
to the right side of the printer.)