Epson DM-D210 Installation Manual - Page 36
Self Test, Diagnostics
View all Epson DM-D210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Self Test The DM-D210 has a self test function. If you want to perform a self test, you must change the setting of the DIP switch. Check Items of Self test The following items are checked during the self test: ❏ Control ROM version ❏ DIP switch settings ❏ Memory switch settings ❏ Example of display characters ❏ Example of each function, such as brightness, flashing, and scroll Performing Self test To perform the self test, follow the steps below. 1. Turn off the power for the DM-D210. 2. Set the SW 1-8 of the DIP switch to ON, and turn on the power. Note: If the contents of the self test are not displayed, the DM-D210 may be malfunctioning. Please contact your DM-D210 dealer for assistance. When the self test is finished and no error occurs, the DM-D210 is ready to receive data. Diagnostics The DM-D210 has the diagnostics function. When the DM-D210 is turned on, diagnostics, such as internal memory test, is carried out regardless of the DIP switch settings. When an error is detected, the error message is displayed and no operation is carried out until power is turned off. 34