Epson DM-D210 Installation Manual - Page 27

English Jumper setting Set the jumpers on the DM-D stand as follows: JP1 1-2 2-3 JP2 1-2 2-3 Contents Set the jumpers as in the left columns when connecting both the TM printer and the DM-D stand. (Default setting) Set the jumpers as in the left column when using the DM-D stand as stand alone. (TM printer is not connected.) The jumpers are located as follows: JP2 JP1 Precautions on using the power supply unit To avoid damage to the DM-D210 and the power supply unit, make sure to note the following points. ❏ Use the optional Seiko Epson products, PS-170, or PA-6508, PA-6511, PA-6513, PB-6509 or PB-6510 as the power supply. ❏ Never connect the DC cable to the power supply unit when the power supply unit is connected. ❏ Unplug the DC cable by holding the connector part. If you pull the cable to unplug, it may be damaged. 25