Epson DM-D500 Technical Reference Guide - Page 62
Data Flow, Stand-alone Connection
![]() |
View all Epson DM-D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Data Flow Stand-alone Connection In a stand-alone connection, the customer display is directly connected to the computer serial port. The printer is connected to another computer port. In the stand-alone connection, data flows as indicated below. Computer DP-501 DM-D500 (Display) Power supply Transmit data from the computer Transmit data to the computer • In the stand-alone connection, data is sent from the host computer to the customer display, and from the customer display to the host. (When 2-3 is selected in jumpers JP1 and JP2 on the DP-501) • Enabled only when the display is selected by the peripheral equipment command of ESC/POS for using user setting commands. • Settings for communication must be the same for the computer and customer display. • Data transmission from DM-D500 to a computer is disabled (default setting). It is not used by the driver either. To use this function, it must be enabled with the ESC/POS command. 62
![](/manual_guide/products/epson-dmd500-technical-reference-guide-1533798/62.png)