Epson DS-410 Users Guide - Page 101
Solving Scanning Problems, Light status, Condition/solution, Parent topic, Related references
![]() |
View all Epson DS-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Light status Condition/solution The power light is on The scanner is turned on and ready to scan The power light is flashing The scanner is scanning, initializing, or in standby mode The power light is flashing and the ! error light is on The scanner cover is open or a paper jam or double feed has occurred. Make sure the scanner cover is closed and there is no jammed paper inside. Remove and reload the originals. The power light and the A fatal error has occurred. Try the following: ! error light are flashing at the same time • Check the scanner connection to your computer to make sure it is secure. • Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support. The power light is off and the The firmware update has failed and the scanner is in recovery mode. ! error light and automatic Try updating the firmware again. feeding mode light are on Parent topic: Solving Problems Related references Original Jams in Scanner Where to Get Help Related topics Loading Originals Scanning Solving Scanning Problems Check these solutions if you have problems scanning with your product. Scanner Does Not Turn On or Turns Off Unexpectedly Scanner Button Does Not Work as Expected Scanning Software Does Not Operate Correctly Cannot Start Epson Scan 2 Original Feeds Incorrectly in Scanner Original Jams in Scanner Scanning is Slow 101
![](/manual_guide/products/epson-ds410-users-guide-be035d0/101.png)