Epson DS-410 Users Guide - Page 39
Photo or irregularly shaped original, Detect Double Feed, Special Original Specifications
![]() |
View all Epson DS-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Photo or irregularly shaped original 8. Slide the edge guides against the edges of the original or carrier sheet. 9. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning special originals. 10. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the ejected originals. Note: If thicker paper does not eject properly or falls from the output tray, push in the output tray and allow the originals to eject freely onto the surface below the scanner. If the scanned images are affected by the originals ejecting below the scanner, try placing the scanner on the edge of a table where the ejected originals can drop freely. Special Original Specifications 39
![](/manual_guide/products/epson-ds410-users-guide-be035d0/39.png)
39
Photo or irregularly shaped original
8.
Slide the edge guides against the edges of the original or carrier sheet.
9.
Turn off the
Detect Double Feed
setting on the Main Settings tab in Epson Scan 2 when scanning
special originals.
10. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the
ejected originals.
Note:
If thicker paper does not eject properly or falls from the output tray, push in the output tray and
allow the originals to eject freely onto the surface below the scanner. If the scanned images are
affected by the originals ejecting below the scanner, try placing the scanner on the edge of a table
where the ejected originals can drop freely.
Special Original Specifications