Epson ELPDC04 User Manual - Page 20
Adjusting the Camera DIP Switches
View all Epson ELPDC04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Adjusting the Camera DIP Switches The document camera has four DIP switches that control special settings. Refer to the table below to make sure they are set correctly for your configuration. DIP switches 0 1 A B C AC IN POWER ON RS-232C OFF RGB OUT RGB IN USB VIDEO OUT 0 1 A B C DIP Switch 0 - - A NTSC* B 60 Hz* C Mouse* * Default setting 1 Function - Factory use only. PAL Selects the TV video output format. Select NTSC for US model TV sets and PAL for European TV sets. 50 Hz Selects the shutter frequency. If the image starts to flicker, try setting the shutter frequency to 50. RS-232C Selects the communication mode of the RS-232C port. To use a mouse, set the switch to 0. To use control codes, set the switch to 1. note For a list of control codes, go to http://support.epson.com. After selecting your product from the list, you can access technical information on controlling your document camera from your computer. Setting Up the Document Camera 15