Epson ELPDC04 User Manual - Page 23
Turning On Your Equipment, Turning On the Document Camera
![]() |
View all Epson ELPDC04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Turning On Your Equipment Make sure your document camera and other equipment are set up and connected correctly, as described in Chapter 1. Always turn on your projector or monitor first. Then turn on your document camera, as described below, followed by any other equipment you've connected to it. You can turn on your computer and video equipment in any order. If you have both a computer and video source connected, you may have to switch to the desired source to see its image, as described on page 20. Turning On the Document Camera Follow these steps to plug in and turn on the document camera: 1. Connect one end of the power cord to the document camera's power inlet. AC IN POWER ON RS-232C OFF power inlet RGB OUT RGB IN USB VIDEO OUT 0 1 A B C 2. Connect the other end to a grounded electrical outlet. 3. Turn on the projector or monitor. 4. Turn on the document camera. AC IN POWER ON RS-232C OFF power switch RGB OUT RGB IN USB VIDEO OUT 0 1 A B C After a few moments, the upper lamps turn on. 5. Place your presentation material on the stage. You should see an image on screen. 18 Using the Document Camera
![](/manual_guide/products/epson-elpdc04-high-resolution-document-camera-user-manual-39a8727/23.png)