Epson EMP-5550 Owners Manual - Page 39
on the video source., Connect the other yellow RCA plug to the video-out jack
View all Epson EMP-5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. If your composite video uses an RCA-type composite video connector, you will need the A/V cable supplied with your projector. If your video uses a S-Video, you will need to provide YOUR OWN S-Video or use the S-Video cable that came with your video source. 3. For composite video, connect the yellow RCA plug at one end of the A/V cable to the projector's Video jack. Connect the other yellow RCA plug to the video-out jack on the video source. A/V cable 4. Connect the other plugs on the A/V cable to the Audio jacks of the projector: insert the white plug into the L jack and the red plug into the R jack. Connect the plug at the other end of the A/V cable to the audio output jacks of the video source. s s s s s s Connecting to a Computer 17