Epson EMP-5550 Owners Manual - Page 83
A blank screen is displayed., The image or parts of the image are blurred or not in, focus.
View all Epson EMP-5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
u A blank screen is displayed. The computer signal cannot be interpreted by the projector. Verify the display format (see page 65 or 66). When you see a blank screen, you cannot access the projector menus. u The image or parts of the image are blurred or not in focus. Adjust the Brightness and Contrast settings on the Video main menu. If you're viewing a computer image, also try adjusting the Tracking and Sync buttons on the projector's operation panel. There may be dirt or smears on the lens. Clean the lens as described in Chapter 4, "Maintenance." u The colors of the image are not right. The color balance may be incorrect. If you're displaying a computer image, adjust the red, green, and blue settings in the Video menu. If you're displaying video, adjust the Color and Tint (NTSC only) settings on the Video menu. u There is no sound. First check that the volume setting is not turned all the way down and that the A/V cable is securely attached to both the projector and the audio source. The wrong source is selected. Press either the Computer or Video button on the remote control or operation panel to select the proper source. s s s s s s Problems with the Image or Sound 61