Epson EMP-82e User Manual - Page 41
Epson EMP-82e Manual
View all Epson EMP-82e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
List of Functions 36 "Settings" Menu Screen shot from EMP-X3 Screen shot from EMP-82/62 Sub-menu Keystone Auto Keystone (EMP-82/62 only) Operation Lock Pointer Shape Brightness Control Volume Reset Function Corrects vertical keystone distortion in images. sp.i Sets the function for automatically detecting the projector angle and correcting keystone "On" or "Off" when the projector is tilted vertically. This function is only enabled when the "Projection" command in the "Extended" menu is set to "Front". If it is set to something other than "Front", this menu cannot be selected. When set to "On", the operation of all buttons on the projector's control panel except for the [Power] button will be disabled. sp.29 The shape of the pointer can be selected. sp.21 Pointer 1: Pointer 2: Pointer 3: This lets you set the lamp brightness to one of two settings. Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is selected, the brightness of the images is reduced, the amount of electricity consumed and noise produced during projection are reduced, and the lamp's operating life is extended. Also the fan noise is reduced. (Electrical consumption: about an 35 W decrease, lamp life: about 1.5 times longer, Fan noise: about 20% reduction) Adjusts the volume. sp.17 Resets all adjustment values on the "Settings" menu to their default settings. If you would like to return all menu items to their default, see "Reset All". sp.40