Epson EPL-N1200 Service Manual - Page 124

Troubleshooting, EPL-N1200 Service Manual, Symptom, Possible Cause, Parts Name, Check Item, Remedy

Page 124 highlights

Troubleshooting EPL-N1200 Service Manual Table 5-29. Print Quality Anomaly (Continued) Symptom White/black lines and bands ABCDE ABCDE ABCDE ABCDE Possible Cause Parts Name Check Item Fusing roller - Improper fusing Thermistor - Defective optical unit Optical unit - Remedy Clean the fusing roller. Replace the thermistor. Replace the optical unit. Poor image transfer Image transfer roller Check the surface of image transfer roller. Replace the image transfer roller. Areas of missing print Poor image transfer ABCDE ABCDE ABCDE ABCDE Poor development Poor development Paper problem Toner smudges on back side of pages Image transfer roller Check the surface of the image transfer roller. HV1 board - - Imaging cartridge - HV1 board - Paper Check to see if paper is moist. Image transfer roller Check the surface of image transfer roller. Fusing roller - Replace the image transfer roller. Replace the HV1 board. Shake the imaging cartridge. Replace the imaging cartridge. Replace the HV1 board. Replace the paper. Clean the image transfer roller. Clean the fusing roller. Smears on paper path. Other paper paths Check the paper path. Clean the paper path. Print offset Improper fusing Fusing roller Check if there is any dust or damage on the fusing roller surface. Clean or replace fusing roller. Dirty drum Imaging Cartridge - Replace the imaging cartridge. 5-12 Rev. A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149

Table 5-29. Print Quality Anomaly (Continued)
Symptom
Possible Cause
Parts Name
Check Item
Remedy
White/black lines
and bands
Improper fusing
Fusing roller
Clean the fusing
roller.
Thermistor
Replace the
thermistor.
Defective optical
unit
Optical unit
Replace the optical
unit.
Poor image
transfer
Image transfer
roller
Check the
surface of image
transfer roller.
Replace the image
transfer roller.
Areas of missing
print
Poor image
transfer
Image transfer
roller
Check the
surface of the
image transfer
roller.
Replace the image
transfer roller.
HV1 board
Replace the HV1
board.
Poor
development
Imaging
cartridge
Shake the imaging
cartridge.
Replace the imaging
cartridge.
Poor
development
HV1 board
Replace the HV1
board.
Paper problem
Paper
Check to see if
paper is moist.
Replace the paper.
Toner smudges on
back side of pages
Smears on paper
path.
Image transfer
roller
Check the
surface of image
transfer roller.
Clean the image
transfer roller.
Fusing roller
Clean the fusing roller.
Other paper
paths
Check the paper
path.
Clean the paper path.
Print offset
Improper fusing
Fusing roller
Check if there is
any dust or
damage on the
fusing roller
surface.
Clean or replace
fusing roller.
Dirty drum
Imaging
Cartridge
Replace the imaging
cartridge.
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
Troubleshooting
EPL-N1200 Service Manual
5-12
Rev. A