Epson EPL-N1200 Service Manual - Page 95
Interlock Switch Removal, Orange Wire, Red Wire, Interlock Switch
View all Epson EPL-N1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
EPL-N1200 Service Manual Disassembly and Assembly 3.2.2.3 Interlock Switch Removal 1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it from light or place it in a dark area. 2. Remove the main controller board. (Refer to Section 3.2.1.1.) 3. Remove one CC (M3 × 6) screw from the control panel and lift the panel forward. 4. Remove two CC (M3x8) screws and take the right cover away. 5. Remove two CC (M3x8) screws on the paper guide case. 6. Remove four CC (M3x6) screws on the top and two CC (M3x6) screws at the right of the shield cover and take it away. 7. Remove two CP(S)(P) (M3x16) screws. 8. Remove two cables (orange and red) from the interlock switch. CC (M3x16) Orange Wire Red Wire Interlock Switch Figure 3-12. Interlock Switch Removal Rev. A 3-11