Epson ES-200 Users Guide - Page 120
simultaneously: ES-300W, Wi-Fi ES-300W - paper jam
View all Epson ES-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Light status The ! error light is on and the ready light is flashing The following lights are flashing separately or simultaneously: • ready • ! error The following lights are flashing separately or simultaneously: • ready • ! error • Wi-Fi (ES-300W) The ready light is off and any of the following lights are on: • ! error • automatic feeding mode • Wi-Fi (ES-300W) The following lights are flashing separately or simultaneously: (ES-300W) • ! error • Wi-Fi Condition/solution A paper jam or a double feed has occurred. Remove any paper loaded in the input tray. If the light continues to flash, a scanner error may have occurred. Turn the scanner off and then back on again. If the error continues, contact Epson for support. The scanner cover is open. Make sure the scanner cover is closed and there is no jammed paper inside. A fatal error has occurred while using the scanner with a USB cable. Try the following: • Check the scanner connection to your computer to make sure it is secure. • Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support. A fatal error has occurred while using the scanner with Wi-Fi (ES300W). Turn the scanner off and then back on again. If the error continues, the scanner may be malfunctioning. Contact Epson for support. The firmware update has failed and the scanner is in recovery mode. Try updating the firmware again. An access point settings error (security error) has occurred. Press the stop button to clear the error, restart the devices you want to connect to the network, then reconnect to the network. 120