Epson ES-200 Users Guide - Page 56
Wi-Fi Protected Setup (WPS), connection attempt will fail.
View all Epson ES-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
3. Turn on the scanner. Wait for the ready and Wi-Fi lights on the scanner to stay on. 4. Press and hold the Wi-Fi connect button on the scanner for at least 3 seconds, then release it when the ready and Wi-Fi lights flash alternately. The scanner enters standby mode for WPS connection for two minutes. 5. Press the WPS button on your computer or device, or enable the WPS feature. Note: You must press the WPS button or enable the WPS feature within two minutes or the connection attempt will fail. When the ready and Wi-Fi lights on the scanner stay on, the connection is established. Parent topic: Direct Wi-Fi Mode (AP Mode) Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your scanner to the network using Wi-Fi Protected Setup (WPS). 56