Epson ES-C220 Users Guide - Page 11

Note: When using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button > Scanner Settings tab > Scan Settings. • Document Protection When the Paper Protection setting is enabled (Epson Scan 2 Utility > Scanner Setting tab > Paper Protection), scanning stops immediately when the following conditions are detected: • A paper feed error has occurred • An original is fed at an angle • The combination of the original and the scanner position does not match Note: Some feed errors may not be accurately detected. If detection does not work correctly, try changing the settings. If no errors are detected, select On-High to increase the sensitivity. If errors are detected incorrectly, select On-Low to decrease the sensitivity. Select On-Medium to detect stapled originals and skewed originals that the lower setting could not detect. • Double-feed Detection Set the timing to stop operations when a double feed is detected (Epson Scan 2 Utility > Scanner Setting tab > Double Feed Stop Timing). Select Immediate to stop scanning immediately after any double feed is detected. Select After Eject to stop scanning the next document. • Scan from a mobile device with Epson Smart Panel (ES-C320W/RR-400W only) You can use the Epson Smart Panel app to scan from your iOS or Android device over a direct Wi-Fi connection. You can save the scanned data to your device, upload it to a cloud service, or send it by email. You can also make Wi-Fi settings and troubleshoot errors directly from your smart device. Parent topic: Product Basics Related references Scanner Position Related tasks Loading Passports Scanning a Document in Epson ScanSmart Sending a Scan to a Cloud Service Attaching a Scan to Email Product Parts Locations See these sections to identify the parts on your product. 11