Epson ES-C220 Users Guide - Page 248

such devices or inside a medical facility, follow the directions from authorized staff members at the facility, and follow all posted warnings and directions on the device to avoid causing an accident. Do not connect this product to the internet directly. Connect it to a network protected by a router or firewall. Parent topic: Notices Notes on the Administrator Password You can set an administrator password to prevent unauthorized access or changes to general product settings and network settings stored in the product when connecting to a network (ES-C320W/RR400W). The default value of the administrator password is printed on the product's label. The label is located on the side, the back, or the bottom, depending on the product. If there is no "Password" label attached, enter the serial number from the label attached to the bottom of the product for the default administrator password. You must enter the administrator password when performing the following operations: • Accessing the advanced settings in Web Config • Updating your product's firmware from a computer or smart device • Using applications that can change the product's settings • Changing or resetting the administrator password You can change the administrator password in Web Config. The new password must be 8 to 20 characters long and only contain single-byte alphanumeric characters and symbols. You can restore the administrator password to the default setting by resetting the network settings. Note: Resetting the administrator password also resets the user name. Parent topic: Notices Related tasks Changing the Administrator Password in Web Config Restrictions on Copying Observe the following restrictions to ensure responsible and legal use of your scanner. 248