Epson Equity 320SX PLUS User Manual - Page 191
ACCESSING YOUR CURRENT PASSWORD, Using the Password
View all Epson Equity 320SX PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Accessing Your Current Password If you have forgotten your current password and cannot use your computer, follow these steps: 1. Turn off the computer and follow the instructions under "Changing the Jumper Settings" in Chapter 6 to disable the password function by setting jumper J2 to position A. Caution Be sure to ground yourself on the back inside panel of the computer before touching any of the interior components. Always replace the cover on the computer before you turn it on again. 2. Turn on the computer. You do not see the Enter Password prompt. 3. When the Press to start SETUP prompt appears, press Del. 4. Highlight Run SETUP and press Enter. You see the SETUP menu. Follow the instructions in Chapter 2 to either set a new password or select Not Instal1ed (if you do not want to set a new password). Be sure to save your SETUP information when you exit the program. 5. Turn off the computer and follow the instructions under "Changing the Jumper Settings" in Chapter 6 to enable the password function by setting jumper J2 to position B. 6. If you do not have a hard disk, insert the Startup diskette in drive A. Turn on the computer. If you set a new password, you see the Enter Password prompt. Enter the password to access your system. (See "Using the Password" in Chapter 3.) C-6 Troubleshooting