Epson G5000 User's Guide - Page 51
connectors labeled Y/Cb/Cr or Y/Pb/Pr., when viewing image
UPC - 010343873285
View all Epson G5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
■ Tracking Adjust this value to eliminate vertical stripes in computer images. ■ Sync Adjust this value if computer images appear blurry or flicker. ■ Position If the image is slightly cut off on one or more sides, it may not be centered exactly. Select this setting and use the pointer button to center it. ■ Progressive For composite video, S-video, and component video signals only. Turn this setting on to convert interlaced signals into progressive signals (best for still images). Select Video for viewing general video images. Select Film/Auto for movie images, CG, and animated images. Leave the setting Off for moving images. ■ Noise Reduction Smooths out rough images. Select your favorite setting. Epson recommends that you select Off when viewing image sources with very low noise, such as DVDs. ■ Input Signal If the colors don't look right on the Auto setting, select the setting for the type of equipment you've connected to the Computer1 or Computer2 ports. Choose RGB for a computer or RGB-video connection, and Component for a video player that outputs a component video signal (with connectors labeled Y/Cb/Cr or Y/Pb/Pr). note You can also use the remote control's Auto button to automatically reset the projector's Tracking, Sync, and Position settings. See page 89 for details. note The Noise Reduction setting cannot be set for digital RGB signals. Fine-Tuning the Projector 51