Epson G5000 User's Guide - Page 66
and enter the projector's, If your network does not assign addresses automatically, turn
UPC - 010343873285
View all Epson G5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3. Press the Menu button on the remote control, select the Network menu, then press Enter. You see the following screen: note If you're a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you're monitoring. 4. Choose Wired LAN and press Enter. 5. Do one of the following: ■ If your network assigns addresses automatically, turn on the DHCP setting. ■ If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address. To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press Enter. 6. When you're done making all necessary changes, select Return, Setup complete, and then Yes to confirm that you want to save the changes. Press Menu to exit. 66 Managing Projectors