Epson G6150 Users Guide - Page 165
Setting, Options, Description, Standby Mode, Communication On, Always On, HDBaseT
View all Epson G6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Setting Standby Mode Options Communication On Communication Off HDBaseT (PowerLite Pro G6750WU/G6800/G6900WU) Control Communications Description Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port (PowerLite Pro G6750WU/G6800/G6900WU) When the projector is connected to the HDBaseT Transmitter, enables or disables communication from the Ethernet and serial ports on the transmitter; turning on this setting disables the projector's LAN, RS232C, and Remote ports 165
Setting
Options
Description
Standby Mode
Communication On
Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to
Always On
)
• Communication from the
HDBaseT
port (PowerLite Pro
G6750WU/G6800/G6900WU)
HDBaseT
Control Communications
When the projector is connected
to the HDBaseT Transmitter,
(PowerLite Pro
enables or disables
G6750WU/G6800/G6900WU)
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's
LAN
,
RS-
232C
, and
Remote
ports
165