Epson G6150 Users Guide - Page 76
Enter, AMX Device Discovery, Crestron RoomView, Bonjour, Message, Broadcasting, Complete
View all Epson G6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. Select the SNMP menu and press Enter (PowerLite G6050W/G6150/G6450WU/G6550WU/G6750WU). 6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected (PowerLite Pro G6800/G6900WU). 8. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView setting to allow the projector to be detected (PowerLite Pro G6800/G6900WU). 9. If you are connecting to a network using Bonjour, turn on the Bonjour setting (PowerLite Pro G6800/G6900WU). 10. If you want this projector to receive broadcasted messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Message Broadcasting plug-in for EasyMP Monitor (PowerLite Pro G6800/G6900WU) (Windows only). 11. When you finish selecting settings, select Complete or Setup complete and follow the on-screen instructions to save your settings and exit the menus. 76