Epson G6150 Users Guide - Page 81
Controlling a Networked Projector Using Crestron RoomView, Complete, Setup Complete, Parent topic
View all Epson G6150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Note: Enabling Crestron RoomView disables the Epson Message Broadcast feature in the EasyMP Monitor software. 6. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Turn off the projector, then turn it on again to enable the setting. Parent topic: Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1. Start your web browser on a computer connected to the network. 2. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see this screen: 3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 81