Epson MovieMate 30s Quick Reference Guide - (Accolade Wireless Audio Set ) - Page 22

Refer to the table below for a description of the Wireless Audio Set's status lights and their meanings: Lights The P lights are solid green The P light is solid yellow The P lights are off The P lights are solid green and the LINK lights are solid green The P lights are solid green and the LINK lights are flashing green The P lights are solid green and the LINK lights are off Explanation The transmitter and receiver are powered on and operating normally. The transmitter has not received an audio signal from your Epson MovieMate or DVD player or hasn't had a link with the receiver and has gone into standby mode. The transmitter will turn on automatically when an audio signal is sent to it. Transmitter: The transmitter is turned off. Make sure that you installed the batteries correctly or make sure that the power adapter is plugged in; see page 8. Then press the P button to turn it back on. If the transmitter has not received an audio signal after 25 minutes, it will turn off automatically. Receiver: The receiver is turned off. Make sure that the power adapter is plugged in; see page 14. Then press the P button to turn it back on. The transmitter and receiver are communicating normally. The transmitter and receiver have a weak communication signal. Make sure that there is direct line of sight between the two antennas and that the units are less than 19.7 feet (6 meters) apart. There is no communication between the transmitter and receiver. Make sure that there is direct line of sight between the two antennas and that the units are less than 19.7 feet (6 meters) apart. 22 Solving Problems