Epson P-2000 Product Support Bulletin(s) - Page 18
blank, but do not power on the unit
 |
UPC - 010343852112
View all Epson P-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1. Install a blank memory card into a Memory Card Reader/Writer and copy the "PSVFIRM1" folder (including all the files in the folder) to the root directory of your memory card. 2. Verify that the battery is installed in the P-2000 3. Connect the AC adapter to the P-2000, but do not power on the unit. 4. After the firmware file has been downloaded to your memory card, insert the CompactFlash or sD memory card into the P-2000 as shown below. Page 3 of 5 PSB.2005.03.001R4
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
 |
 |
Page 3 of 5
PSB.2005.03.001R4
1. Install a
blank
memory card into a Memory Card Reader/Writer and copy the
“PSVFIRM1” folder (including all the files in the folder) to the root directory of your
memory card.
2. Verify that the battery is installed in the P-2000
3. Connect the AC adapter to the P-2000,
but do not power on the unit
.
4. After the firmware file has been downloaded to your memory card, insert the
CompactFlash or sD memory card into the P-2000 as shown below.