Epson Perfection 4990 Pro Start Here Card - Page 1
Epson Perfection 4990 Pro Manual
View all Epson Perfection 4990 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Start Here Epson® Perfection® 4990 Pro Unpack Your Scanner 1 Make sure you have all the parts shown below for your Epson scanner: Scanner CD-ROM with EPSON Scan driver, software, and electronic manuals Adobe® Photoshop® Elements CD-ROM Scanner cover/ transparency unit Document mat LaserSoft ImagingTM SilverFast® Ai CD-ROM ArcSoft® Software Suite CD-ROM Film holders MonacoEZcolorTM CD-ROM Film area guide USB cable Note: If you'll be connecting your scanner using IEEE 1394 (FireWire® or iLinkTM), you'll need to purchase an IEEE 1394 cable (not included). 2 Remove all the packing tape, but leave the large sticker in place until you are instructed to remove it. IMPORTANT! Leave the sticker in place until you are instructed to remove it 3 Insert the hinges on the cover into the square holes at the back of the scanner. 4 Slide the transportation lock to the unlocked position. 5 Attach the document mat. Hold the top of the document mat and slide it down gently along the document cover. Make sure the tabs on the bottom and sides of the document mat fit in the slots on the document cover. 6 Close the cover. CPD-18893 Printed in XXXXXX XX.XX-XX XXX