Epson PowerLite 1880 User's Guide - Page 46
Controlling a Networked Projector Using a Web Browser, Others, Enter, AMX Device Discovery, RoomView
View all Epson PowerLite 1880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Select the Others menu and press Enter. 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 7. If your network environment uses a Crestron RoomView controller, turn on the RoomView setting to allow the projector to be detected. 8. If you are connecting to a network using Bonjour, turn on the Bonjour setting. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Using the Projector on a Network Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely. 1. Make sure the projector is turned on. 46