Epson PowerLite Home Cinema 5025UB User Manual - Page 101

Power light Off Status light Flashing blue Lamp light Temp light Orange Off Flashing blue Varies Flashing Off orange Off Flashing blue Off Flashing orange Off Flashing blue Flashing Flashing orange orange Off Flashing blue Orange Orange Off Flashing blue Flashing Off orange Status and solution Lamp has a problem • Check the Lamp Hours in the Info menu to see if the lamp is burned out. Wait for the lamp to cool down, and then remove it to see if it is broken or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Replace the lamp soon to avoid damage; do not continue using the projector A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help Auto Iris error; turn the projector off, unplug it, and contact Epson for help Power error; turn the projector off, unplug it, and contact Epson for help Internal projector error; turn the projector off, unplug it, and contact Epson for help Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems 101