Epson Runsense SF-510 User Manual - Page 100
Resetting the system
View all Epson Runsense SF-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Troubleshooting Web application Problem When communicating with a computer, an error screen is displayed and communication stops. If you still cannot solve the problem, contact Epson. See "Where to get help" on page 100. Solution Do not move the product and the cradle during communication. Avoid communicating data under environments where static electricity can be easily generated. If the same error occurs, reconnect the cradle to start the communication again. Resetting the system If your product is not functioning correctly, you can reset it. Hold down all of the buttons (A/B/C or D) at the same time. The screen resets and the product restarts. You will need to re-select the initial settings after the restart. See "Initial Settings" on page 16. c Important: Measurement data is not recorded if a system reset is performed while measuring. Note: O Setting data and measurement data remain as they were before the reset was performed. O The following shows the differences between a system reset and initialization. The time needs to be set again for both operations. System reset: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration information all remain as they were before the reset was performed. Initialize: The User Settings, Sys. Settings, Measure set., history, pulse, stride, and smartphone registration information are all Initialized. 99