Epson Runsense SF-510 User Manual - Page 32
Screen display, Measurement screen
View all Epson Runsense SF-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Measuring your workouts Note: The screen shown may differ depending on the settings you've selected. See "Screen Layout options" on page 88. 4 Press C to stop measuring at any time; you can press C again to resume measuring. 5 Hold down D while measuring is stopped to reset the Measurement screen. The data measured up to that point is stored in the product's memory. You can check your past workouts by pressing D on the Time screen. See "Viewing past workouts" on page 48. Note: To stop measuring and return to the Time screen, do one of the following: O After resetting the measurement results in step 5, hold down A. O While the screen in step 4 is displayed while measurement is stopped, hold down C. The measurement results are reset and the Time screen is displayed. O If no operations are made for 60 minutes on a screen other than the measuring screen, the Time screen is displayed. Screen display Measurement screen There are different measurement screens available. Each screen shows different information about your current activity. Press A to switch between these screens. Note: You can change the number of lines displayed and the measurements displayed for each screen. See "Screen settings" on page 86. Screen1 Screen Default display 3 Lines Default measurements shown Distance Split Time Average Pace 31