Epson Runsense SF-510 User Manual - Page 18
About the battery
View all Epson Runsense SF-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting up your SF-510/SF-710 Note: O When you do not use the product for a while, it enters sleep mode and the time display turns off. The display is restored the next time you move the product. O If time synchronization fails, the signal from the GPS may not be being received properly. Set the Time Adjust option in the Sys. Settings menu. See "System Set. options" on page 85. About the battery You can check how much charge remains from the battery icon below the time display. Battery icon Hours remaining* GPS On 24 to 17 hours 17 to 10 hours * Approximate battery life remaining while in Chronograph mode. Actual battery life will vary. 10 to 3 hours 3 to 0 hours c Important: If the product is left for a long time with a low battery, the performance of the rechargeable battery will deteriorate. Make sure you charge the product at least once every six months even when it is not being used. Note: If the battery runs out, the measurement data is still stored in the memory.The date and time may reset, and the Date may need to be manually re-entered. 17