Epson SF-710 User Manual - Page 18

About the battery

Page 18 highlights

Setting up your SF-510/SF-710 Note: O When you do not use the product for a while, it enters sleep mode and the time display turns off. The display is restored the next time you move the product. O If time synchronization fails, the signal from the GPS may not be being received properly. Set the Time Adjust option in the Sys. Settings menu. See "System Set. options" on page 85. About the battery You can check how much charge remains from the battery icon below the time display. Battery icon Hours remaining* GPS On 24 to 17 hours 17 to 10 hours * Approximate battery life remaining while in Chronograph mode. Actual battery life will vary. 10 to 3 hours 3 to 0 hours c Important: If the product is left for a long time with a low battery, the performance of the rechargeable battery will deteriorate. Make sure you charge the product at least once every six months even when it is not being used. Note: If the battery runs out, the measurement data is still stored in the memory.The date and time may reset, and the Date may need to be manually re-entered. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

Setting up your SF-510/SF-710
17
About the battery
You can check how much charge remains from the battery icon below the time display.
Note:
O
When you do not use the product for a while, it
enters sleep mode and the time display turns off.
The display is restored the next time you move the
product.
O
If time synchronization fails, the signal from the
GPS may not be being received properly. Set the
Time Adjust
option in the
Sys. Settings
menu.
See “System Set. options” on page 85.
Battery icon
Hours
remaining*
GPS On
24 to 17 hours
17 to 10 hours
10 to 3 hours
3 to 0 hours
*
Approximate battery life remaining while in Chronograph mode.
Actual battery life will vary.
c
Important:
If the product is left for a long time with a low battery, the performance of the rechargeable battery will deteriorate.
Make sure you charge the product at least once every six months even when it is not being used.
Note:
If the battery runs out, the measurement data is still stored in the memory.The date and time may reset, and the Date may
need to be manually re-entered.