Epson SF-710 User Manual - Page 42
while measuring is stopped to, reset the screen.
![]() |
View all Epson SF-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Measuring your workouts The Goal Measurement screen is displayed. 4 Hold down D while measuring is stopped to reset the screen. Measuring 1 Press C on the Goal Measurement screen to start measuring. 2 When your goal time or distance is reached, the Finish screen is displayed. The time, distance, and calories burnt are displayed. Data measured up to that point is stored in the product's memory. You can check it by pressing D on the Time screen. See "Viewing past workouts" on page 48. Note: Do any of the following to stop measuring and return to the Time screen: O After resetting the measurement results in step 4, hold down A. O While the screen in step 3 is displayed, hold down C. The measurement results are reset and the Time screen is displayed. O If you do not press any buttons for 60 minutes on a screen other than the Measurement screen, the Time screen is displayed. Note: An alarm notifies you when you reach 50% and 90% of your goal time or distance. 3 Press C to stop measuring. 41
![](/manual_guide/products/epson-sf510-user-manual-b696707/42.png)