Epson SF-710 User Manual - Page 67
Replacing the battery
![]() |
View all Epson SF-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Measuring heart rate Replacing the battery If you cannot measure your heart rate, you may need to replace the heart rate chest strap's battery. The chest strap uses a CR2032 lithium battery. 1 Use a flat object, such as a coin or a slotted screwdriver, to remove the battery cover. Note: You can prevent damage to the cover by wrapping the flat object in a thin piece of fabric. 2 Remove the battery. 3 Turn the battery over so that the negative side is facing up and put it back in, and then wait for at least three seconds. The heart rate chest strap resets. Note: Any remaining charge in the chest strap's sensor circuitry is dispersed by removing the battery, reinserting it with the negative side facing up, and waiting for at least three seconds. If the heart rate monitor temporarily freezes, you can also reset it using this method. 4 Insert a new battery. Make sure the + side is facing up. 66
![](/manual_guide/products/epson-sf510-user-manual-b696707/67.png)