Epson Stylus COLOR 8³ eight cubed Product Information Guide - Page 2

EPSON Stylus Color 880/880i Paper Paper type Single sheets Transparencies, glossy film, glossy paper Matte Paper Heavyweight Self-adhesive sheets Envelopes Index (ink jet) cards Photo Paper Photo Stickers Premium Glossy Photo Paper Iron-On Cool Peel Transfer Paper Size Paper types Letter (8.5 × 11 inches) Legal (8.5 × 14 inches) Half letter (statement, 5.5 × 8.5 inches) Executive (7.5 × 10 inches) A4 (210 × 297 mm) A5 (148 × 210 mm) Plain bond paper and special ink jet papers distributed by EPSON Letter (8.5 × 11 inches) A4 (210 × 297 mm) A6 (105 × 148 mm), glossy film only Transparencies, glossy paper, and glossy film distributed by EPSON Letter (8.5 × 11 inches) Matte paper distributed by EPSON Thickness Weight 0.003 to 0.004 inch 17 to 24 lb (0.08 to 0.11 mm) (64 to 90 g/m2) for plain bond for plain bond paper paper - - - - A4 (210 × 297 mm) Self adhesive sheets distributed by - - EPSON No. 10, 4.1 × 9.5 inches (104 × 140 mm) Plain bond paper or air mail paper DL, 4.3 × 8.7 inches (110 × 220 mm) C6, 4.4 × 6.4 inches (114 × 162 mm) 132 × 220 mm (5.2 × 8.7 inches) 0.006 to 0.02 inch 12 to 20 lb (0.16 to 0.52 mm) (45 to 75 g/m2) A6 (105 × 148 mm) Ink jet cards distributed by EPSON - - 8 × 10 inches (203 × 254 mm) Letter (8.5 × 11 inches) Photo paper distributed by EPSON - - A4 (210 × 297 mm) 4 × 6 inches (102 × 152 mm) Panoramic (210 × 594 mm) A6 (105 × 148 mm), 16 frames/sheet Photo stickers distributed by EPSON - - Letter (8.5 × 11 inches) Glossy photo paper distributed by - - EPSON Letter (8.5 × 11 inches) Transfer paper distributed by EPSON - - Note: Always load paper into the sheet feeder short edge first. Envelopes should be loaded flap edge first, with the flap side down. Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper. Do not load curled or folded paper. Use papers under these conditions: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 40 to 60% RH Store printouts on EPSON Photo Quality Glossy Film and Self Adhesive Sheets under these conditions: Temperature: 59 to 86 °F (15 to 30 °C) Humidity: 20 to 60% RH The availability of paper types varies by location. Not all paper types match the Media Type setting names in your printer software. See the chart on page 6 or the instructions that came with your paper to select the correct Media Type setting. Printable area A A B-L B-R B-L B-R C C single sheets/index cards envelopes A: The minimum top margin is 0.12 inch (3.0 mm). When loading multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 1.2 inches (30 mm). B-L: The minimum left margin is 0.12 inch (3.0 mm). B-R: The minimum right margin is as follows: 0.12 inch (3.0 mm) for single sheets and C6 envelopes 0.28 inch (7 mm) for DL envelopes. 1.10 inch (28 mm) for No. 10 envelopes. C: The minimum bottom margin is 0.54 inch (14.0 mm). * You can extend the minimum bottom margin to 0.12 inch (3.0 mm) by selecting Maximum as the Printable Area setting. However, print quality may decline in the expanded area. Before printing large jobs, print a single sheet to confirm print quality. 2 - EPSON Stylus Color 880/880i 8/00