Epson Stylus NX430 Quick Guide - Page 19
Replacing Ink Cartridges - ink refills
View all Epson Stylus NX430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Replacing Ink Cartridges Make sure you have a new ink cartridge before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Note: Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. 1. Turn on your printer. 2. If an ink cartridge is expended, you see a message on the LCD screen. Note which cartridges need to be replaced and press OK. If a cartridge is expended, you must replace it to be able to print. If a cartridge is low, you can continue printing until a cartridge needs replacement. If you're replacing a cartridge before you see a message on the LCD screen, press if necessary and select F Setup. Select Maintenance, then select Ink Cartridge Replacement and press OK. 3. Lift up the scanner. 4. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it off with soap and water. If ink gets in your eyes, flush them immediately with water. If it gets in your mouth, spit it out and see a doctor right away. Replacing Ink Cartridges 19