Epson Stylus Photo 1200 Printer Basics - Page 44
Follow these guidelines when the control panel lights come on or flash - maintenance
View all Epson Stylus Photo 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Follow these guidelines when the control panel lights come on or flash: P is on The P power light is on when the printer is on and ready to print. It flashes when the printer is receiving a print job or performing a maintenance operation, such as cleaning the print head. S flashes When the S paper out light flashes, paper is jammed in the printer. Turn off the printer and gently pull out all paper. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the stack against the right edge guide and slide the left edge guide over to the paper's left edge. Turn on the printer and press the E load/eject button. S is on When the S paper out light comes on, your paper is out or incorrectly loaded. Make sure none of the sheets are curled, creased, old, stuck together, or too thin. Then reload the stack against the right edge guide and slide the left edge guide over to the paper's left edge. Press the E load/eject button. B or A flash When an ink out light flashes, your ink supply is low. Make sure you have a replacement cartridge. B or A are on When an ink out light comes on, you need to replace the ink cartridge. See page 30 for instructions. P and S flash, and B and A are on When the P power and S paper out lights flash and the B black and A color ink out lights come on, jammed paper may be blocking movement of the print head. Turn off the printer, wait a few seconds, and turn it back on. If no paper ejects, turn off the printer, remove the jammed paper, and turn it on again. If the lights still flash or stay on, contact your dealer or EPSON; see page 46 for contact information. P S B A flash When all the lights flash, your printer may have an internal error. Make sure you removed all the packing material as described on the unpacking sheet in your printer box. Then turn off the printer, wait a few seconds, and turn it on again. If the lights still flash or stay on, contact your dealer or EPSON; see page 46 for contact information. P S B A are off When all the lights are off, the printer is not receiving power. Try these solutions: s Make sure the printer is turned on. s Turn off the printer, plug in the power cord securely, and turn on the printer again. s Make sure the outlet is operable and not controlled by a switch or timer. Try using another outlet. 38