Epson Stylus Pro 9890 User's Guide - Page 52
Updating Your Printer Firmware, Checking the Current Firmware Version
View all Epson Stylus Pro 9890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 | Setting Up the Printer Note: With Windows XP, if you see a Found New Hardware Wizard screen, select No, not this time, click Next, and click Next again. 7. Read the license agreement and click Accept. 8. When you see a screen asking you to turn on the printer, press the printer's P Power button. (Make sure the printer is connected; see page 48.) For network connection, click the Manual button, select the port you created for the printer, and click OK. If you didn't create a port for the printer, select FILE. 9. When you see the final installation screen, click Exit. 10. Register your printer with Epson, then remove the printer software CD-ROM. 11. If you need to create a port, see the Network Guide. Go to the next section to update the printer firmware, if necessary. Updating Your Printer Firmware To keep your printer features and functionality up to date, you should check for a newer version of firmware on the Epson support site and update your printer, if necessary. Tip: For best results, use a USB connection when you update the firmware on your printer. Checking the Current Firmware Version 1. Press the r Menu button. 2. Press the d button until PRINTER STATUS is highlighted, then press Menu. 3. Press Menu again and note the firmware version displayed. When done, press the l button. 52