Epson SureColor F6470 Users Guide - Page 47

Adjusting the Amount of Media Fed While Printing

Get Epson SureColor F6470 PDF manuals and user guides View all Epson SureColor F6470 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

SC-F6400 Series/SC-F6400H Series User's Guide Basic Operations Use a scale that can measure in increments of at least 0.5 mm (0.02 in.). We also recommend using a scale that can measure at least 500 mm (20.0 in.). E The screen for entering confirmation results for the adjustment pattern is displayed. When Manual(Standard) is selected Set the values printed under the patterns selected in A and B, and then press OK. When Manual(Measurement) is selected Set the values measured in step 4 for #1 and #2 respectively, and then press OK. When adjustments are complete, the Home screen is displayed. Adjusting the Amount of Media Fed While Printing You can perform fine adjustments for the amount of media fed while printing. Adjusting while printing allows you to quickly check the adjustment results. A During printing, press the following area on the home screen (adjust while printing). If the home screen (adjust while printing) is not displayed, press (switch screens) on the home screen. B Press / on the screen, or press the / buttons on the control panel to change the value. If the feed amount is too small, black bands (dark stripes) appear; press the (or button) to adjust the feed amount upwards. In contrast, if the feed amount is too large, white bands (pale stripes) appear; press the (or button) to adjust the feed amount downwards. C Check the printing result. If you are not satisfied with the results, use the / , or the / buttons on the control panel to change the value. The setting for the currently selected registered media number is updated. D Press to return to the home screen. Note: The results of changing the settings are un-done if you perform any of the following operations. ❏ Restart Media Feed Adjustment. ❏ Execute Clear All Data and Settings. When you have finished the target printing, we recommend performing Print Adjustments from the settings menu. U "Optimizing Media Settings (Print Head Alignment and Media Feed Adjustment)" on page 44 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
Use a scale that can measure in increments of at
least 0.5 mm (0.02 in.). We also recommend
using a scale that can measure at least 500 mm
(20.0 in.).
E
The screen for entering confirmation results for
the adjustment pattern is displayed.
When Manual(Standard) is selected
Set the values printed under the patterns
selected in A and B, and then press
OK
.
When Manual(Measurement) is selected
Set the values measured in step 4 for #1 and #2
respectively, and then press
OK
.
When adjustments are complete, the Home
screen is displayed.
Adjusting the Amount of
Media Fed While Printing
You can perform fine adjustments for the amount of
media fed while printing. Adjusting while printing
allows you to quickly check the adjustment results.
A
During printing, press the following area on the
home screen (adjust while printing).
If the home screen (adjust while printing) is not
displayed, press
(switch screens) on the
home screen.
B
Press
/
on the screen, or press the
/
buttons on the control panel to change the
value.
If the feed amount is too small, black bands
(dark stripes) appear; press the
(or
button) to adjust the feed amount upwards.
In contrast, if the feed amount is too large,
white bands (pale stripes) appear; press the
(or
button) to adjust the feed amount
downwards.
C
Check the printing result. If you are not
satisfied with the results, use the
/
, or
the
/
buttons on the control panel to
change the value.
The setting for the currently selected registered
media number is updated.
D
Press
to return to the home screen.
Note:
The results of changing the settings are un-done if
you perform any of the following operations.
❏
Restart
Media Feed Adjustment
.
❏
Execute
Clear All Data and Settings
.
When you have finished the target printing, we
recommend performing
Print Adjustments
from the
settings menu.
U
“Optimizing Media Settings (Print Head
Alignment and Media Feed Adjustment)” on page 44
SC-F6400 Series/SC-F6400H Series
User's Guide
Basic Operations
47