Epson SureColor S50675 High Production Edition Quick Reference Guide - Page 23

Maintaining the Printer | 21 English 6. Select Proceed and press OK. 7. Select a cleaning level and press OK. 8. Print a nozzle pattern and check the results to determine whether the head cleaning was successful. If you cannot recover all nozzles by running the heaviest cleaning cycle, you need to wash the ink system, as described on page 26. Maintaining the Printer You should regularly check the ink status and replace cartridges (see page 24) as necessary. For the S50675/S70675, the printer performs automatic maintenance to prevent ink accumulating and causing clogs. Do not turn the printer off, or this maintenance will not be performed. Periodically, you also must perform the following maintenance procedures: Procedure Clean the media system and maintenance cover Remove and shake ink cartridges Wash the print head Clean the print head, wiper, caps, wiper rail Frequency Daily Daily As needed Daily or more often if needed Dispose of waste ink Replace the wiper, wiper cleaner, and ink flushing pad As needed Every 3 months or as needed Instructions below page 25 page 26 page 26, page 29 page 34 page 36 Cleaning the Media System and Maintenance Cover To remove ink and particles of paper, clean the platen heater, pressure rollers, media holding plates, and inside left maintenance cover before starting work each day. 1. Make sure the printer is turned off. 2. Wait a minute, then open the front cover.