Epson SureColor T3270 Screen Print Edition User Manual - Page 90
Switching to Roll 1/Roll 2 by Roll Length, Roll Switch Condition - how to print full screen on windows
View all Epson SureColor T3270 Screen Print Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Epson SureColor T-Series User's Guide More Ways to Print 4 Set Print Quality and other necessary settings, and then print. The printer prints to the roll paper of Roll 2 (A0 Width). If A3 or A2 is selected in Step 3, the printer prints to the roll paper of Roll 1 (A2 Width). Making Settings for Mac OS X 1 Using the control panel of the printer, confirm Best Fit is set in Setup menu > Printer Setup > Roll Paper Setup > Roll Switch Condition > Paper Width. The default Paper Width setting is Best Fit. If the setting has not been changed, the setting is Best Fit. U"Setup menu" on page 139 2 On the computer, open the Print screen, confirm that Paper size is Roll Paper. In this example, select A1. 3 Check that the Roll Switch is Auto. If the setting is not Auto, click it and select Auto. 4 Set Print Quality and other necessary settings, and then print. The printer prints to the roll paper of Roll 2 (A0 Width) If A3 or A2 is selected in Step 2, the printer prints to the roll paper of Roll 1 (A2 Width). Switching to Roll 1/Roll 2 by Roll Length If you use the settings described below, the printer switches between Roll 1 and Roll 2 automatically to print using the roll with the most paper remaining. Usage example You want to predict whether the roll paper remaining is less than the print job during continuous unattended operation of a large print job, switch to the other roll paper automatically, and continue printing without stopping. In this example, the paper is loaded as follows. Roll 1: Plain Paper A1 Width Roll 2: Plain Paper A1 Width Settings on Windows 1 Use the control panel of the printer to open the Paper menu and set Roll Paper Remaining to On, and then set the Roll Paper length loaded into both Roll 1 and Roll 2. When you set the roll paper, if roll paper length has been set or a barcode with roll data is printed on the current roll, proceed to Step 2. U"Paper menu" on page 134 2 Using the control panel of the printer, confirm Print Length is set in Setup menu > Printer Setup > Roll Paper Setup > Roll Switch Condition > Paper Length. The default Paper Length setting is Print Length. If the setting has not been changed, the setting is Print Length. U"Setup menu" on page 139 3 Open the Printer Settings tab of the printer driver and confirm that Source is Roll Auto XXXXX. 90