Epson TM-T20II-i Server Direct Print Users Manual for TM-i firmware ver.4.1 - Page 14
Restriction
View all Epson TM-T20II-i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Restriction ❏ If power is restored the device or the cover is open during printing, printing may not occur properly. ❏ To turn the device power off and on, be sure to allow an interval of five seconds or more between power off and on. ❏ Use a switching hub to connect the device. If no switching hubs are used, the device in online status is more likely to be judged as offline depending on the traffic condition. ❏ Drawer open operates when the TM intelligent printer is in online status (when the roll paper is loaded and the roll paper cover is closed). If you are using a TM-i (TM-i firmware Version 3.0 or later)/ TM-DT (TM-DT software Version 2.2 or later), if you designate forced transmission mode with ePOS-Print XML, it will operate offline. ❏ When the specified timeout time has passed after printing starts, the printing is canceled, but the data recognized by the printer before print cancelling process starts is printed. 14