Epson TM-T20II-i Server Direct Print Users Manual for TM-i firmware ver.4.1 - Page 42
Connect the TM-DT to the network and turn the power ON., Set the following items and click [Apply]. - default ip address
![]() |
View all Epson TM-T20II-i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TM-DT Settings Configure the Status Notification settings using EPSON TMNet WebConfig. 1 Connect the TM-DT to the network and turn the power ON. 2 Start EPSON TMNet WebConfig from the shortcut on the desktop. EPSON TMNet WebConfig starts. If you are making settings from an external device, set the TM-DT IP address in the address for the Web browser. The default IP address for TM-DT is 192.168.192.168. http://[IP address of the TM-DT]/webconfig/ 3 Select as [Settings]-[Web service settings]-[Status notification]. The "Status notification" screen appears. 4 Set the following items and click [Apply]. Item Description Set ID for the server-side program to identify TM-DT. This ID becomes the user ID used for Digest access authentication. The set value will also be ID passed as an ID parameter value for the form data posted to the server. Not required for the sample program. Password Set your password used for Digest access authentication. Not required for the sample program. Specify the Test_print.php address of the Web server. URL Example: http://[IP address of the Web Server]/Test_status.php Click the [Access Test] button to check if the address is accessible. Set the request interval. Interval (sec) Request interval refers to the interval between the end of the previous communication and the start of the next communication. 42
![](/manual_guide/products/epson-tmh6000ivdt-server-direct-print-user-s-manual-tmi-firmware-ver41-d04f5e8/42.png)