Epson TM-T20II Technical Reference Guide - Page 14
Control Panel, Power LED green, Error LED orange, Feed button
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Control Panel Power LED Error LED Paper LED Feed button When installing the printer vertically or hanging the printer on a wall, be sure to attach the included control panel label for vertical installation on the roll paper cover. The control panel label for vertical installation is upside down. Power LED (green) Lights when the power supply is on. Error LED (orange) • Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate that the printer is ready. • Lights when printing has stopped (offline) due to paper end. • Lights when the roll paper cover is open (offline). • Flashes when an error occurs. (For information about the flashing patterns, see "Error Status" on page 17.) Paper LED (orange) • Lights when the roll paper is out. • Flashes when Self-test standby state. • Flashes when macro execution standby state. Feed button Pressing this button once feeds the roll paper by one line. Holding this button down feeds the roll paper continuously. Enabling/disabling of Feed button can be selected by a command. If the command is set to disable this button, it does not function. For information about ESC/POS commands, see the ESC/POS Quick Reference or the ESC/POS Command Reference. 14