Epson TM-T20II Technical Reference Guide - Page 34
Hanging the Printer on a Wall
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Hanging the Printer on a Wall To hang the printer on the wall, follow the steps below. To fix the printer securely, hang the printer on a wall made of wood, concrete, or metal. The thickness of the wall should be 10 mm or more. Be sure to use metallic screws. The screws on the wall side must have a pull-out strength of 150 N (15.3 kgf) or more. 1 Attach the included control panel label for vertical installation on the roll paper cover. Control panel label for vertical 2 Install 2 screws (screw diameter: 4 mm, head diameter: 7 to 9 mm) in the wall at an interval of 80 mm. Make sure the length of the screw's body in the wall is 10 mm or more, and the length outside the wall is 3 to 4 mm. 80 mm {3.15"} 3 - 4 mm {0.12 - 0.16"} 7 - 9 mm {0.28 - 0.35"} 4 mm {0.16"} 10 mm {0.39"} or more 34