Epson TM-T20II Technical Reference Guide - Page 78
Software Setting Mode, Starting the Software setting mode
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Software Setting Mode Starting the Software setting mode Follow the steps below to run this mode. 1 Close the roll paper cover. 2 While pressing the Feed button, turn on the printer. (Keep pressing the Feed button until the printer starts printing.) The printer starts printing current status of the printer. When the printer finishes printing the printer status, the following message is printed and the Paper LED flashes. (The printer is now in the self-test wait mode.): "Select Modes by pressing Feed button. Continue SELF-TEST: Less than 1 second Mode Selection: 1 second or more" 3 Press the Feed button for 1 second or more to enter the Mode Selection. The printer starts printing instructions. Mode Selection Modes 0 : Exit and Reboot Printer 1 : NV Graphics Information 2 : Receipt Enhancement Information 3 : Customize Value Settings 4 : or more: None Select Modes by executing following procedure. step 1. Press the Feed button less than 1 second as many times as the selected mode number. step 2. Press Feed button for 1 second or more. 78