Epson TM-U220 Users Manual - Page 14
Inserting and Replacing the Ribbon Cassette, Inserting Roll Paper
View all Epson TM-U220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English If you are going to store the printer or leave it unused for a long time, turn it off using the power supply switch on the printer. Inserting and Replacing the Ribbon Cassette CAUTION: The print head becomes very hot during printing. Allow it to cool before you replace the ribbon cassette. CAUTION: Never turn the ribbon cassette's feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged. Note: Use the EPSON ERC-38 ribbon cassette for your printer. 1. Open the ribbon cassette cover by using the tabs on the sides of the cover, as shown in illustration D. 2. Turn the knob two or three times in the direction of the arrow, as shown in illustration E. 3. Insert the ribbon in the position shown in illustration F and push the ribbon cassette down until it clicks. Note: Make sure the ribbon is installed between the print head and the platen without wrinkles or creases. 4. Again turn the ribbon cassette's knob 2 or 3 times in the direction of the arrow and close the ribbon cassette cover. CAUTION: Be careful not to touch the print head with your fingers when turning the ribbon cassette knob because the print head is hot and you might be burned. When you replace the ribbon casette, lift the left side of the ribbon cassette first; then lift the whole ribbon cassette. Inserting Roll Paper CAUTION: Be sure to use roll paper that meets the specifications. Be sure not to touch the manual cutter. Otherwise your fingers might be injured. 6 TM-U220 User's Manual