Epson U200 User Manual - Page 11

TM-U200 Series User, s Manual, Do not remove the screw from the print head cover.

Get Epson U200 - TM B/W Dot-matrix Printer PDF manuals and user guides View all Epson U200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

English Note: Do not remove the screw from the print head cover. 8. Lift up the print head cover as shown in illustration 14 on the previous page. 9. Remove all the jammed paper. Note: Do not pull the jammed paper in the opposite direction of paper feeding. 10. Replace the print head cover and secure it with the screw. 11. Replace the ribbon cassette and close the autocutter. 12. If the autocutter blade is not in its normal position (if you can see the blade in the autocutter slit, which is indicated by an arrow in illustration 15 below), the blade is not in the normal position), insert a screwdriver to the right side of the autocutter, and turn the gear inside to move the blade to the normal position. 15 13. Replace the paper roll and close the printer cover. TM-U200 Series User's Manual 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
TM-U200 Series User
’
s Manual
9
English
Note:
Do not remove the screw from the print head cover.
8.
Lift up the print head cover as shown in illustration
14
on the
previous page.
9.
Remove all the jammed paper.
Note:
Do not pull the jammed paper in the opposite direction of paper
feeding.
10.
Replace the print head cover and secure it with the screw.
11.
Replace the ribbon cassette and close the autocutter.
12.
If the autocutter blade is not in its normal position (if you can
see the blade in the autocutter slit, which is indicated by an
arrow in illustration
15
below), the blade is not in the normal
position), insert a screwdriver to the right side of the
autocutter, and turn the gear inside to move the blade to the
normal position.
13.
Replace the paper roll and close the printer cover.
15