Epson V11H336120 User's Guide - PowerLite Home Cinema 8100 / 8500 UB - Page 47
shuts the projector off automatically when there is no video signal.
UPC - 010343874374
View all Epson V11H336120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
■ Component Settings > Input Signal > Component Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment's signal. ■ Trigger Out Settings > Trigger Out Turn on this setting to have the Trigger out port output a 12-volt signal to lower your projection screen when the projector is running. Note: If you change this setting, the new setting will take effect the next time you turn the projector on. ■ Illumination Settings > Illumination Turn off this setting to deactivate the lights on the projector's Ppower and buttons. Use this setting if you find the lights distracting in a darkened room. ■ Sleep Mode source Settings > Sleep Mode Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. To turn the projector back on, press the Ppower button on the remote control or the projector. ■ Child Lock Settings > Child Lock Lets you lock the Ppower button on the projector's control panel to make it more difficult for a child to turn on the projector. See page 32 for more information. ■ Control Panel Lock Settings > Control Panel Lock Lets you disable all the buttons on the projector's control panel to prevent the image from being accidentally changed once it is adjusted. See page 32 for more information. Making Detailed Adjustments 47